Bag Vessels
Our bag vessels are adaptable and suited for contaminant removal in a wide variety of high-flow industrial and commercial applications.
Bag Vessels and Accessories
Global Filter vessels meet the requirements for the broadest range of applications and industries. Not only do we have versatile vessel products, we offer a wide range of vessel accessories to enhance your filtration products and systems.
Our extensive stock allows you to customize your application, with the shortest lead times available.
GBFV8-Series Stainless Steel Single Bag Liquid Vessels
GBFV8-Series Stainless Steel Bag Vessels are designed to meet and/or exceed nearly all application requirements. The V-ring design provides a positive snap-fit to ensure against by-pass and deliver clean effluent.
Features
- BSPT or RF flange under EN 1092-1 for Inlet/outlet connections.
All other type on specific demand - Stainless steel construction with support perforated baskets (hole Ø3mm)
- Adjustable tripod mounting/support leg assemblies
- Easy-access eye-nut/swing-bolt closures with handle
- 304 or 316L stainless steel construction options uni-style (side & bottom
outlet) offers increased piping flexibility - Single o-ring seal (Buna-N standard). All other material possible on request. • 10 bar pressure rating standard
- Under ASME design code, other design code on request
- Fluid must be Non hazardous liquid, other fluid on request
Options
- ASME Code Stamp
- Electropolished Finish
- Sanitary porting
- Mesh-lined/perforated baskets
- Alternate seal materials
- EPDM
- Silicone
Liquid Vessel Drawings
GBFV82-Series Twin Capacity Bag Liquid Filter Vessels
GBFV82-Series Twin-Capacity Bag Vessels are designed to meet and/or exceed nearly all application requirements. The V-ring design provides a positive snap-fit to ensure against by-pass and deliver clean effluent. Vessels offer the flow and loading capacity of a multi-bag vessel at a more economical cost.
Features
- 304 or 316L stainless steel construction options
- 150 PSI pressure rating standard
- Snap-fit V-ring bag seal design
- Single o-ring seal (Buna standard)
- Two identical GBFV830 vessels working in tandem
- Adjustable tripod mounting/support leg assemblies
- High flow rates and loading capacity at low pressure drops
- Stainless steel support baskets (9/64” standard)
- Two easy-access eye-nut/swing-bolt closures with single handle
- RF or DIN Flanged inlet/outlet connections (same side and opposite side options available)
Options
- ASME Code Stamp
- Electropolished finish
- Mesh-lined/perforated baskets
- Alternate seal materials
- EPDM (required for NSF-61)
- Teflon®
- Encapsulated Viton®
- Viton®
Liquid Vessel Drawings
GMBV-Series Multi-Bag Liquid Vessels
GMBV-Series Multi-Bag Vessels are designed for high flow and/or high contaminant load applications where clean effluent is critical. The V-ring design provides a positive snap-fit to ensure against by-pass.
Features
- Heavy-duty welded angle mounting/support legs
- RF Flanged “inline” inlet/outlet connections
- Bearing-assisted hand-wheel closure
- Permanent compression/hold-down plate
- Stainless steel support baskets (9/64” standard)
- Easy-access eye-nut/swing-bolt closure
- 304 or 316 stainless steel construction
- Snap-fit V-ring bag seal design
- 150 PSI pressure rating
- Single o-ring seal (Buna-N standard)
Options
- ASME Code Stamp
- CE Mark (SS only)
- Mesh-lined/perforated baskets
- Alternate Seal Materials
- EPDM (required for NSF-61)
- Teflon®
- Encapsulated Viton®
- Viton®
Liquid Vessel Drawings
GMBE-Series Stainless & Carbon Steel Multi-Bag Liquid Vessels
GMBE-Series Stainless & Carbon Steel Multi-Bag Liquid Vessels are designed to offer a high-quality and economical solution for a variety of high flow and high load applications. The V-ring tubesheet design provides a positive snap-fit to ensure against by-pass.
Features
- 304, 316L Stainless Steel and Carbon Steel construction
- Epoxy-coated exterior (CS only)
- 150 PSI pressure rating
- RF or DIN Flanged “inline” inlet/outlet connections
- Snap-fit V-ring bag seal design
- Stainless steel perforated support baskets (9/64” perf. standard)
- Permanent compression/hold-down plate
- Heavy-duty welded angle mounting/support legs
- Easy-access eye-nut/swing-bolt closure with bearing-assisted hand-wheel davit
- Single o-ring seal (Buna-N standard)
- Mesh-lined/perforated baskets
Options
- Mesh-lined/perforated baskets
- Alternate seal materials
- EPDM (required for NSF-61)
- Teflon®
- Encapsulated Viton®
- Viton®