HF-Series High Flow Filter Cartridge
HF-Series High Flow Polypropylene and Microglass Filter Cartridges address your need for absolute-rated filter cartridges in high flowrate and/or high solids-load applications.
HF-Series Overview
HF-Series High Flow Polypropylene and Microglass Filter Cartridges address your need for absolute-rated filter cartridges in high flowrate and/or high solids-load applications. Thermally-bonded construction utilizing polypropylene hardware for high cleanliness and broad chemical compatibility. Inside to outside flow direction and single o-ring seal ensures against by-pass and captures all contaminants internally, thus preventing clean-side contamination during change-out. The robust molded outer cage and handle offer durability and easy installation/removal. HF-Series cartridges are designed for use as a direct replacement to the Pall UltipleatTM High Flow series. Absolute ratings exceed 99% efficiencies, Nominal ratings exceed 90%.
Typical Applications
- Amine
- Bulk chemicals • Coolants
- EDM fluids
- Glycol
- Plating solutions
- Process water
Construction Materials
- Filtration Media: Polypropylene or Microglass*
- Support Media: Polypropylene
- End Caps: Polypropylene
- Outer Support Cage: Polypropylene
- O-Rings/Gaskets: Buna, EPDM, Silicone, Viton*
Operating Conditions
- Change Out ΔP (recommended): 35 PSID
- Polypropylene Temperature (max): 160 ̊F (71 ̊C)
- Microglass Temperature (max): 200 ̊F (93 ̊C)
- Differential Pressure (max): 60 PSID (4.1 bar) at 68 ̊F (20 ̊C)
- Flow Direction: Inside to Outside
Dimensions
- Lengths: 20″, 40″, 60″
- Outside Diameter: 6.25″
NSF Certification
NSF Certification applies for use only with drinking water. Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. Product options denoted with an asterisk (*) are not included in the Certification.
Flow Rate vs Pressure Drop
Food Safety Compliance
Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations, 21CFR. Materials used to produce filter media and hardware are deemed safe for use in contact with foodstuffs in accordance with EU Directives 1935/2004, and/or 10/2011.
HF-Series Ordering Specifications
| Material | PP = Polypropylene FG = Microglass* |
| Rating (μ) | 1, 5, 10, 20, 50, 100 |
| Absolute/Nominal | A = Absolute N = Nominal |
| Length | 20″ (50.8cm), 40″ (101.6 cm), 60″ (152.4 cm) |
| O-Rings/Gaskets | B = Buna E = EPDM S = Silicone V = Viton®* |